Trauma / Ortho

STAHL Air Pneumatic

ML100D Pneumatic Power Drill - Gradually adjustable running speed- Instant stop upon release.  Easily change between clockwise and counterclockwise rotation.

  • Comfort grip for the hand
  • Net weight 830g
  • Cannulation 0-3.9mm
  • Chuck capacity 0-6.5mm, 1/4" chuck
  • Variable speed 0-950rpm
  • Operating pressure 90-11Opsi {7-8kgf/cm'

 

ISA-100 Modular Multi Handpiece - Gradually adjustable running speed -Instant stop upon release.  Easily change between Forward and Reverse.  Cannulation 0-3.9mm

  • Ergonomic Handle
  • Compatible for Drilling & Reaming
  • Net weight 765g
  • Variable speed 0-950rpm
  • Operating pressure 90-11Opsi {7-8kgf/cm')

 

ML100S Pneumatic Power Oscillating Saw - Rotation head on both sides with 90° steps.  Gradually adjustable running speed.

  • Instant stop upon release.  Easily change between clockwise and counter clockwise rotation
  • Ergonomic Handle
  • Net weight 965g
  • Variable speed 0-14,000Cpm
  • Operating pressure 90-11Opsi {7-8kgf/cm')

Stryker CORE & TPS System

CORE & TPS are an integrated, comprehensive group of surgical power tools developed for the fine tolerances of small bone specialties. These system combines speed, power, balance and simplicity to deliver specialty-driven handpieces for optimal performance.

 

  • Specialty driven instruments with increased power for precision cutting with complete OR standardization
  • The CORE or TPS Console provides a central control environment for powered instruments in the operating room
  • A wide variety of Surgical Drills, Saws, Burs, and Microdebriders

 

Stryker Core 5400-50 - The console’s software provides control over system components including the console, the graphical user interface (GUI), the irrigation pump, and the connected handpieces and footswitches (see figure 1). The software’s file management capability allows you to save and store user preference settings and have convenient access to a favorites list of the most frequently used files to improve efficiency

Specifications

  • Size:  12.5 in. [317.5 mm] width 5 in. [127 mm] height 17 in. [431.8 mm] depth
  • Weight:  20 lbs. [9.1 kg]
  • Power Supply: Input voltage: 100-120 V ~, 50-60 Hz, 6.0 A

Attachments

  • Stryker 5400-15 Core Micro Drill
  • Stryker 5400-31 Oscillating Saw
  • Stryker 5400-34 Sagittal Saw
  • Stryker 5400-37 CORE Reciprocating Saw
  • Stryker 5400-99 CORE Universal Driver - Dual-Trigger
  • Stryker 5400-100 Core U Drill

 

Stryker TPS 5100-1 The Stryker Total Performance System is intended for use in the cutting, drilling, decorticating, and smoothing of bone and other bone related tissue in a variety of surgical procedures. It is also used for the placement or cutting of screws, wires, pins, and other fixation devices as it can be used to cut metal

Specifications

  • Size:  11.8 in. [299 mm] wide   x   6.0 in. [152 mm] high   x   9.0 in. [229 mm] deep 12.2 in. [310 mm] deep (units with pump)
  • Weight: 6 lbs. [2.7 Kg]    /    11 lbs. [5.0 Kg] (units with pump)

Attachments

  • Stryker 5100-15 Tps Micro Drill
  • Stryker 5100-31 Tps Micro Oscillating Saw
  • Stryker 5100-34 Tps Micro Sagittal Saw
  • Stryker 5100-37 Tps Micro Reciprocating
  • Stryker 5100-010-060 Perforator Chuck
  • Stryker 5100-99 TPS Universal Driver - Dual-Trigger.  Accepts 4100 series attachments

Stryker System 6

Includes a number of heavy-duty drills and saws. The Sagittal Saw features two-speed control, providing several cutting options. The Reciprocating Saw is compact and has excellent ergonomics. The Sternum Saw cuts aggressively with its faster cutting speed. The Rotary Hand pieces permit drilling at high speed and reaming at high torque.


It takes advantage of innovative motor technology and offers lesser vibration and better hand piece control. There are single and dual trigger options as well as reaming and drilling attachments. It also comes with modular sterilization containers and batteries.

 

Rotary Handpieces

Now providing more options for greater versatility and surgeon preference.
One handpiece allows for both high speed drilling and high torque reaming.
Quick and easy selection of direction and safety options.
Available in Single and Dual Trigger models.

  • 6203-000-000 Single Trigger Rotary
  • 6205-000-000 Dual Trigger Rotary


System 6 Heavy Duty Saws

Advanced Motor Technology provides increased torque for a faster and more efficient cut

  • 6206-000-000 Reciprocating Saw - Smaller size for better ergonomics and ease of use
  • 6207-000-000 Sternum Saw
  • 6208-000-000 Sagittal Saw - Two speed control allows for a wider range of cutting options
  • 6209-000-000 Stryker Precision saw - Oscillating tip dramatically reduces vibration and enhances handpiece control

 

Accessories

6110-120-000 System 6 Battery Charger - Quickly charges System 6 batteries.

  • Modular design allows for 4 different batteries to be charged at the same time.
  • Interactive screen allows user to assess the condition of the battery and read battery usage.
  • Battery charging station diagnoses battery levels and usage

Stryker System 7

  • Sagittal saw is significantly quieter than previous generations
  • Stryker SmartLiFE™ Li-Ion Batteries mean a longer, more reliable battery life
  • Rotary handpiece offers substantially increased torque, providing optimum performance\
  • Integrated SORN Remote Device Management provides a safe and secure connection from your Stryker System 7 devices to Stryker support teams.
  • System 7 design enhancements make it lighter, safer and easier to use

 

Handpieces:

  • All handpieces must pass 100-Point Quality Check Inspection, which helps ensure maximum reliability.
  • No memory effect enables maximum capacity throughout the life of the battery.

 

Models:

  • 7208-000-000 Sagittal Saw
  • 7209-009-000 Precision Saw
  • 7205-000-000 Dual Trigger Rotary
  • 7203-000-000 Single Trigger Rotary
  • 7206-000-000 Reciprocating Saw
  • 7207-000-000 Sternum Saw
  • 7110-120-000 Universal Battery Charger

Hall Power Pro

  • The PowerPro Pneumatic Modular Handpiece, along with an assortment of modular attachments, is designed to perform bone cutting, reaming, drilling, driving screws, sawing, and pin driving functions common to small and large bone orthopedic surgical procedures. This handpiece uses the same attachments as the PowerPro Electric and Battery Systems handpieces.
  • The PowerPro Pneumatic Oscillator Handpiece is designed for sawing in small, large and transverse or longitudinal bone osteotomies, removal of the femoral head and neck, removal of the greater trochanter, resurfacing the tibial plateau and the distal end of the femur such as required in total knee or total hip arthroplasties.
  • The PowerPro Pneumatic Reciprocator Handpiece is designed for sawing in large bone total joint arthroplasties.

 

PowerPro Pneumatic Modular Handpiece (PRO6150):

  • Speed Range: 0 - 1250 rpm
  • Operating Speed (forward and reverse):
  • Drill Position (FWD): 1250 ± 10% rpm  / (REV): 1000 ± 10% rpm
  • Ream Position (with 5:1 attachment): 250 rpm (forward)
  • Average Output Torque (forward and reverse):
  • Drill Position - Forward: 30 in. lbs.
  • Drill Position - Reverse: 20 in. lbs.
  • Ream Position (with 5:1 attachment): 100 in. lbs.
  • Height: 6.0 in. (15.2 cm)  Length: 3.85 in. (9.8 cm)  Weight: 1.5 lbs. (680 g)
  • Duty Cycle: 1 minute ON, 5 minutes OFF
  • Operating Pressure: 110 psi running (7.7 kg/cm2)
  • Recommended Power Source: Medical grade, water-pumped, compressed dry nitrogen
  • Consumption: 13.0 cfm, maximum (368 L/min)

 

PowerPro Pneumatic Oscillator Handpiece (PRO6175)

  • Speed Range: 0 - 14,000 cpm
  • Oscillation Range: 4.5°
  • Height: 6.0 in. (15.2 cm)  Length: 5.25 in. (13.3 cm)   Weight: 1.74 lbs. (790 kg)
  • Duty Cycle: 1 minute ON, 5 minutes OFF
  • Operating Pressure: 110 psi running (7.7 kg/cm2)
  • Recommended Power Source: Medical grade, water-pumped, compressed dry nitrogen
  • Consumption: 13.0 cfm, maximum (368 L/min)

 

PowerPro Pneumatic Reciprocator Handpiece (PRO6185)

  • Speed Range: 0 - 16,000 cpm
  • Stroke: 0.125” (3.2mm)
  • Height: 6.0 in. (15.2 cm)  Length: 4.5 in. (11.4 cm)  Weight: 1.5 lbs. (680 g)
  • Duty Cycle: 1 minute ON, 5 minutes OFF
  • Operating Pressure: 110 psi running (7.7 kg/cm2)
  • Recommended Power Source: Medical grade, water-pumped, compressed dry nitrogen
  • Consumption: 13.0 cfm, maximum (368 L/min)

Hall Series 4

The intended use for the Hall Series 4 handpieces is in large bone surgery.  The Series 4 handpieces combine state-of-the-art ergonomics with the durability, superior quality and convenience found in our powerful and trusted Hall Series 3 instruments.  Features like greater torque, higher speed, less weight and lubeless operation launched the precision Series 3 instruments into the forefront of large-bone surgery

 

5067-001 Pneumatic Drill/Reamer - Whether reaming the acetabulum or cancellous bone in the femoral and tibial canals, the REAM mode gets you through the pro­cedure quickly and efficiently.

The DRILL mode ensures the ideal speed and torque for drill­ing through bone, and with variable speed control and a torque limiter to prevent screw-head breakage, the SCREW mode makes the Series 4 Drill/ Reamer a perfect instrument for setting large-bone screws.

 

5067-002 Pneumatic Oscillator - With the speed and consistent reliability surgeon’s demand, ensures smooth, precise cuts in large-bone procedures. Its wrenches blade-locking collet saves you valuable time, and provides the necessary strength to safely grip longer and wider blades.

 

5067-003 Reciprocator - features the efficiency, speed and depend­ability needed for precision large­bone cuts.  It's the preferred choice for trans­verse osteotomies, including re­moval of the femoral head and neck in total hip procedures, and resurfacing the tibial plateau in knee procedures.

 

5067-004 Pneumatic Trauma Drill - It gives you a multipurpose, com­mon-sense handpiece ideal for drilling and pinning procedures common to trauma surgery.  Lightweight and highly maneu­verable, the Trauma Drill features easily accessible directional controls, a combination collet that accepts Trinkle and AO shanks, and a powerful torque­limited SCREW mode.

Batteries For Power Drills

Stryker 4115 Battery for use with System 5 Handpieces.

  • Requires Stryker 4110-120 battery charger for recharging.
  • Can also be used with Stryker 2100 Battery charger with 4110-115 Adaptor.
  • Optional Stryker 2106-152 Sterilization – Basket sold separately.

 

Stryker 4126-110 for Use with System 4/5 Handpieces.

  • Requires 4216-120 battery housing
  • Requires 4110 Battery charger for recharging.
  • Optional 4126-130 Transfer shield – sold separately

 

Stryker 4212 Small Smart Battery for use with 4207 System 5 Cordless Drivers.

  • Requires 2110 Battery charger and 4110-112 adaptor for recharging.

 

Stryker 4215 Large Smart Battery for use with 4207 System 5 Cordless Drivers.

  • Requires 2110 Battery charger and 4110-112 adaptor for recharging.

 

Stryker 6212 Small Battery for use with System 6 Handpieces.

  • Requires 6110-120 Battery charger for recharging.

 

Stryker 6215 Large Battery for use with System 6 Handpieces.

  • Requires 6110-120 Battery charger for recharging.

 

Stryker 7215 Smart Life for use with System 7 Cordless Drivers.

Requires 7110-120 Battery charger for recharging.

We would love to have you become a part of

our growing family of clients & suppliers!