Arthroscopy - Shavers

Arthrex AR-8300

Motorized, suction/cutting device used for the resection and aspiration of soft tissue, cartilage and bone during arthroscopic surgical procedures.

 

The console is microprocessor controlled and features two fully functional channels that allow optional simultaneous handpiece operation. Both channels can be operated with a single foot switch or individually when a second foot switch is attached to the console. The adapter Power System II has a maximum speed of 8,000 revolutions per minute, providing precise burr control during surgical procedures.

 

Specifications

  • Width 36.8 cm (14.5 inches)
  • Height 13.2 cm (5.2 inches)
  • Depth 32.5 cm (12.8 inches)
  • Weight 7.2 kg (16 lbs.)
  • Water protection IPX1
  • Mains cable 10 A/250 V
  • Power entry module IEC 320/C13
  • Fuse value 6.3 A, 250 V~, 2.0 cm (0.75 inches) Type T
  • AC input 87-264V~, 47/63Hz, 6.3A
  • Applied Part Type BF
  • Cleaning, disinfecting and sterilization refer to Sections 6.0 Cleaning and Disinfecting and 7.0 Sterilization

Dyonics Power II 72200873

Offers two unique, customizable oscillate modes for efficient soft tissue resection; dual hot ports for simultaneous shaver and powered instrument operation; and an integrated flush lavage feature to rapidly clear the visual field of debris.

 

Specifications

  • Control Unit Dimensions  5.75" H x 12" W x 14.25" D146 mm H x 305 mm W x 362 mm D
  • Control Unit Weight   13.85 lbs / 6.28 kg
  • Power Requirements  100–120/200–220 VAC, 50/60 Hz, 960 VA

Stryker Crossfire 475-000-000

Combination powered shaver system/electrosurgical generator, intended for use in arthroscopic and orthopedic procedures. Acts as a connection hub for the various components of the Crossfire™ system.  Powers a motorized shaver handpiece for the mechanical cutting and debridement of bone and soft tissue.  Generates bipolar radio frequency (RF) energy for the electrosurgical cutting and coagulation of tissue.  Provides a central user interface for operating the Crossfire™ system.

 

Specifications

Size: 16.9" L × 12.5" H × 4.5" W

Weight: 20 lbs

Voltage: 100-240 VAC @ 50/60Hz, 6 – 10 A

Inlet Fuse: 15 A, 250V

Motor output max speed: 12000 RPM

Motor duty cycle: Continuous operation

RF output waveform: 200 kHz ± 1%, square wave,

Crest factor <1.5 @ 200 ohms

Linvatec Advantage D3000

The Advantage Drive System combines the functionality of the APEX Drive Sys­tem. The E9000™ System and the PRO2000 PowerPro™ System into one unit. The top portion of the controller is a combina­tion handpiece-drive and low-flow irrigation pump that operates a variety of handpieces con­sisting of drills, shavers, and saws. in conjunc­tion with assorted attachments to perform bone cutting, reaming and drilling. And soft tissue resection.

 

Specifications

  • Dimensions:   7 .o·· (W) x 5.o·· (H) x 13. 7y· (D) 43.2 cm (W) x 12.7 cm (H) x 35.0 cm (D)
  • Weight:  19.5 lbs. (8.86 kg)
  • Pump Flow Rate: 0 -150 mL/minute
  • Total Port Output: 325 VA max. (With 2 handpieces simultaneously connected)
  • Input Voltage: 115 VAC

Dyonics Power 7205841

Blade family auto recognition recalls blade and burr settings Blade window lock helps protect tissue from open edge forms. Communicates with DYONICS 25 and INTELIJET™ pumps to maximize visibility while minimizing fluid usage.

 

Specifications

Control Unit Dimensions 5.75" H x 12" W x 14.25" D146 mm H x 305 mm W x 362 mm D

Control Unit Weight 13.85 lbs / 6.28 kg

Power Requirements 100–120/200–220 VAC, 50/60 Hz, 960 VA

Stryker TPS 5100-1

The Stryker Total Performance System is intended for use in the cutting, drilling, decorticating, and smoothing of bone and other bone related tissue in a variety of surgical procedures. It is also used for the placement or cutting of screws, wires, pins, and other fixation devices as it can be used to cut metal

 

Specifications

  • Size:  11.8 in. [299 mm] W   x   6.0 in. [152 mm] H   x   9.0 in. [229 mm] D 12.2 in. [310 mm] deep (units with pump)
  • Weight: 6 lbs. [2.7 Kg]    /    11 lbs. [5.0 Kg] (units with pump)

Stryker Core 5400-50

The console’s software provides control over system components including the console, the graphical user interface (GUI), the irrigation pump, and the connected handpieces and footswitches (see figure 1). The software’s file management capability allows you to save and store user preference settings and have convenient access to a favorites list of the most frequently used files to improve efficiency.

 

Specifications

Size:  12.5 in. [317.5 mm] width 5 in. [127 mm] height 17 in. [431.8 mm] depth

Weight:  20 lbs. [9.1 kg]

Power Supply: Input voltage: 100-120 V ~, 50-60 Hz, 6.0 A

We would love to have you become a part of our growing family of clients & suppliers!